Connections ____________________
This section provides instructions to connect the Wadia 302 CD Player to the rest of your music system. Below is an illustration of the Wadia 302 CD Player rear panel, showing all inputs and outputs.
IR pass through |
|
| Digital inputs (Optional) |
(page 14) |
|
| (page 14) |
IN 1 | IN 2 | IN 3 | IN 4 |
RIGHT |
| ANALOG OUTPUT | LEFT |
IR IN |
|
|
|
| R | L |
|
IR OUT |
|
|
|
|
| DIGITAL OUTPUT |
|
|
|
| DESIGNED &MANUFACTURED |
|
|
| IN THE U.S.A. |
AC inlet and power switch (page 9)
Analog outputs | Digital output | Maximum Output Level Adjustment |
(page 10) | (page 14) | (page 13) |
Avoid allowing static shocks to be applied to the inputs or outputs. To prevent static shocks, touch any grounded surface, such as the chassis of a component that is plugged into an AC socket, before connecting or removing a cable. It is unlikely that a static shock will damage the unit, but it may cause the Wadia 302 CD Player circuitry to
Inputs and outputs can be safely connected to the Wadia 302 CD Player:
•When the AC power is switched off OR
•When the unit is in
9
