Remote Control Operation
The Wadia 581se/781i CD Player remote control requires two
Program* / Transport Time Mode |
|
|
| Display On/Off |
|
| |||
Repeat / Single Track Repeat |
|
|
| Balance Left/Right |
|
| |||
Direct |
|
|
| Enter |
|
| |||
|
|
|
| Mode |
|
|
|
| |
0 |
|
|
| Input |
|
|
| ||
|
|
| + 10** / Phase Invert | |
|
|
| ||
Drawer Open/Close / Search Back |
|
|
| Search Forward / Mute |
|
| |||
Pause / Play |
|
|
| Volume Up/Down |
|
| |||
Stop / Track Back / Track Forward |
|
|
| |
|
|
| ||
|
|
| * Not Active | |
|
| |||
|
|
|
| |
|
|
|
| ** Use before selecting any track |
|
|
|
| greater than nine (see page 12) |
Adjusting the Volume
Whenever the volume control buttons are pressed, the volume for both channels will be increased or decreased by an increment of 1 on the display screen. The range of the volume control is from 1 to 100, with each step representing 0.5 dB change in volume.
Adjusting the Balance
Relative volume of each channel can be adjusted via the balance control buttons on the remote. Pressing one of the balance buttons increases the volume on that channel relative to the other by an increment of 0.2 on the display. This corresponds to a 0.1dB change. The next time the button is pressed the opposite channel is decreased. This way the overall volume level (the sum of the two channels) remains constant within 0.1 dB.
11