Wadia Digital 581SE, 781I Installation and Set-up Unpacking, Accessories, Installing the Tip-Toes

!

!

581se/781i CD Player

Installation and Set-up

Unpacking

Use care in unpacking your Wadia 581se/781i CD Player. Inspect it for any shipping damage and call your dealer immediately if any is found.

Do not plug your Wadia 581se/781i CD Player into an AC outlet if you find shipping damage.

We advise saving all packing materials so that the unit can be easily and safely shipped if the need arises.

Accessories

Provided with the Wadia 581se/781i CD Player are the following accessories:

•AC power cord

•Four tip-toes with threaded studs

•Four steel coasters

•RCA/BNC adapter (only included with 581ise and 781i)

•Remote Control

•Two type AAA batteries

Do not tip the unit onto the back panel. This can damage input and/or output connectors.

Installing the Tip-Toes

With the unit still positioned on its side, screw one of the tip-toes into the bottom of each corner post.

Position the Wadia 581se/781i CD Player where you would like it to reside in your system. We recommend choosing a solid, non-resonant, level surface for best performance. If this surface is susceptible to damage, place one of the steel coasters under each tip-toe.

4