WADIA 850 | COMPACT DISC PLAYER |
Single: To play a single track, press the single button (the single indicator will light in the display window), then press the numeric button(s) which corre- spond(s) to the track you would like to play. The transport will search for the selected track, and playback will start from the beginning of that track. At the conclusion of the track, the transport will enter the stop mode.
To repeat one single track, press the single button (the single indicator will illuminate in the display window), then press the repeat indicator (the repeat button will illuminate in the display window), and then press the numeric button(s) which correspond(s) to the track you would like to repeat. Playback of the track selected will begin immediately. At the conclusion of the track the transport will return to the beginning of that track again, and in this way the selected track will be repeated.
Delete: This button is the opposite of normal programming. Pressing this button while a program is being entered, erases the entire entered program. To play an entire disc, except for specific tracks that you do not want to hear, press this button and then the numeric keys corresponding the tracks you would like to delete (up to 20 selections).
Clear: When the program indicator is illuminated in the display window. To eliminate a particular track from a programmed sequence, first press the check button until the track which you would like to eliminate is selected. Then press the clear button which will clear that particular track from memory.
Time: This button switches between the various time modes on the display. Before play, the total time on the disc, or in a sequence program, is shown. Once a disc starts to play the elapsed time of that track will be shown.
Pressing the button on the remote control once will cause the display to indicate the remaining time in that track (remain). Pressing this button on the remote control again will cause the display to indicate the remaining time on the entire disc, or in a sequenced program (total remain).
Auto Space: Pressing this button will provide a four second space between tracks on disc, irrespective of the actual time between tracks on disc.
Check: When a sequence of tracks has been programmed, the check button can be used to review the contents of that program. After a program has been entered, but before playback has begun, by pressing the check button once, the first programmed track number, its position in the sequence of tracks that have been programmed, and the playing time of the entire sequence, will be displayed. Each subsequent pressing of the check button will provide similar details as you move through each of the programmed tracks.
The programmed contents of a sequence can also be checked during play- back, however, the total program’s playback time will not be displayed.
Repeat: Pressing this button will cause the entire disc to repeat continuously. Pressing this button a second time will take the transport out of the repeat mode. Pressing this button once, following pressing the single button, will cause the track that is playing, or has been selected, to repeat continuously. Pressing either the stop or open buttons will also take the transport out of the repeat mode.
A/B: This button is used to define a section of a disc that is to be repeated continuously. Pressing this button once defines the beginning point (A) of the section to be repeated and pressing this button again defines the ending * 
’ ’ point (B) of the section repeated. Pressing the button a third time will disengage the A/B procedure.
13
