Wadia 861 | COMPACT DISC PLAYER |
REMOTE CONTROL OPERATION
The Wadia 861 remote control requires three
TransportBalance Programming
Drawer
Open /Close
Search
Stop
Volume
Repeat
Single
Track
Index
Display
Direct
Enter
Phase Invert
Input Scroll
Pause
Play
Track
Forward /Rev
A/B Repeat
Transport Time
Mode
Adjusting the Volume Whenever the volume control buttons are pressed, the volume for both channels will be increased or decreased by an increment of 1 on the display screen. The range of the volume control is from 1 to 100, with each step representing 0.5 dB change in volume.
Adjusting the Balance Relative volume of each channel can be adjusted via the balance control but- tons on the remote. Pressing one of the balance buttons increases the vol- ume on that channel relative to the other by an increment of 0.2 on the dis- play. This corresponds to a 0.1 dB change. The next time the button is pressed the opposite channel is decreased. This way the overall volume level (the sum of the two channels) remains constant within 0.1 dB.
Selecting an Input The Wadia 861 has four digital inputs, plus the internal CD drive. Any of the inputs can be selected from the remote control by pressing the input button. Each time the input button is pressed, the next input is selected.
For example, if you are listening to CD input and you press the input select, Input 1 will be selected, press it again, and Input 2 will be selected and
so on. After Input 4, the list will begin again with the CD input.
Whenever you select a new input, the display will switch to the Input Screen.
10