Wadia Digital 861 manual Wadia, Compact Disc Player, On/Off turned off completely

Wadia 861 COMPACT DISC PLAYER

Inverting Absolute The Wadia 861 has the ability to invert absolute phase in the digital domain.

Phase Pressing the Phase Invert button on the remote control will cause the Wadia 861 to invert phase; pressing it again will switch the phase back to normal. If the Wadia 861 is in Phase Invert mode, this will be indicated on the Input Screen of the display.

Turning Display By pressing the Display On or Off button, the Wadia 861 display can be

On/Off turned off completely.

If the display is turned off, it will reappear briefly whenever a Wadia 861 func- tion button on the remote control is pressed.

Mute Modes The Wadia 861 has two mute modes that are automatically implemented under different circumstances.

DSP-Software Mute When the Mute button is pressed on the remote control, the Wadia 861’s DSP engine transmits a stream of zero signal level samples to the DAC section, which results in zero output.

Output-Relay Mute The Wadia 861 Compact Disc Player has mute relay connected between the positive and negative outputs. When this relay is engaged, it connects the positive output to the negative output, reducing the output to zero. This relay, which produces an audible click when it engages or disengages, is not in the music signal path. The mute relay is engaged:

1.When the Wadia 861 detects AC input level below its minimum operating range.

2.Each time the Wadia 861 power switch is turned on.

3.When the volume control is set to zero AND the mute button on the remote control is pressed.

When the Wadia 861 is in either Mute Mode, the Volume Screen will indicate this by Displaying the word, “MUTE.”

INDEX/FORWARD/REV: Pressing these buttons allows access to the previous or next index point within a track that has such indexed sections.

TRACK FORWARD/REV: Pressing these buttons allows access to the previous or next track on a disc.

SEARCH/FORWARD/REV: Pressing these buttons allows fast reverse or fast forward access through a track.

STOP: Pressing this button while a Compact Disc is playing stops PLAY.

PAUSE: Pressing this button, while a Compact Disc is playing, suspends PLAY. Pressing the PLAY button or the PAUSE button will resume play at the point where the pause button was pressed.

PLAY: After a Compact Disc has been loaded into the drawer, pressing this button plays the disc beginning with the first track on the disc or in a sequenced program. Pressing this button while the drawer is open, closes the drawer and begins play with the first track on the disc or in a sequenced program.

11