Wadia 861 | COMPACT DISC PLAYER |
PROGRAMMING THE CD TRANSPORT
Program: Pressing this button enters all tracks subsequently chosen with the numeric buttons (up to a total of 20 selections) as part of a programmed sequence.
Programming a sequence of tracks can be done either in the stop mode or in the play mode.
To program a sequence of tracks from a Compact Disc while in the stop mode, first press the program button. The program indicator will illuminate in the display window. Next, press the numeric buttons of the tracks you would like to program in the sequence desired. The number of each selected track will be indicated under the track indicator, the location of that track within the program (the playing order) of the tracks selected will be indicated in the area where index is usually identified, and the total program playback time
of the sequence will be updated as each track is programmed.
To program a sequence of tracks from a compact disc while in the play mode, the procedure is the same. The only difference is that the total program’s playback time will not be displayed.
A program will continue to be held in memory, even after that program has been completely played.
When programmed playback is ended by pressing the stop button, the program will continue to be held in memory. However, if the stop button is pressed a second time, the programmed contents will be erased from memory.
To exit the Program mode, press the program button again.
Single: To play a single track, press the single button (the single indicator will light in the display window), then press the numeric button(s) which cor- respond(s) to the track you would like to play. The transport will search for the selected track, and playback will start from the beginning of that track. At the conclusion of the track, the transport will stop.
To repeat a single track, press the single button (the single indicator will illuminate in the display window), then press the repeat indicator (the repeat button will illuminate in the display window), and then press the numeric button(s) which correspond(s) to the track you would like to repeat. Playback of the track selected will begin immediately.
Delete: This button is the opposite of normal programming. Pressing this button while a program is being entered erases the entire entered program. To play an entire disc, except for specific tracks that you do not want to hear, press this button and then the numeric buttons corresponding the tracks you would like to delete (up to 20 selections).
15
