Setup & Configuration
—Preamble and Postamble
The 'Preamble' and 'Postamble' options are used to add prefix and suffix characters to the bar code value. Up to 22 characters may be added for each option separately.
Note: This example illustrates how data will be formatted when each option is configured.
Data Stream Example
Preamble
Data
Postamble
NOTE: For help in configuring these settings, consult the programming steps on page 5.
Begin
Preamble
Scan 'Begin'Scan. "Set Preamble" to program preamble. Scan characters from the back cover flap
Set Preamble
using the ASCII Table on page 36. Scan "Set" on the
back cover flap to end.Scan 'Exit'.
Set Postamble
Exit
Postamble
Scan 'Begin'.Scan "Set Postamble" to progam postamble. Scan characters from the back cover flap using the ASCII Table on page 36. Scan "Set" on the back cover flap to end.Scan 'Exit'.
*Default
11