Wasp Bar Code WLR8900 Series manual PREAMBLE/POSTAMBLE Configuration

Chapter 5 PREAMBLE/POSTAMBLE CONFIGURATION

The ‘Preamble/Postamble’ configuration is used to add a prefix or suffix set of characters to the barcode value. Up to 8 characters may be added for each option separately. Preamble and postamble characters can function concurrently, but need to be configured separately.

To add preamble or postamble characters, follow the steps below:

1)Scan the ‘Clear Pre/Postamble’ barcode on this page.

2)Scan the ‘Preamble’ or ‘Postamble’ barcode.

3)Use Appendix B on pages 32-35 to locate the characters you want to add as preamble or postamble characters. Make sure that you scan the barcode associated with each letter before preceding to the next character. For example, to add the letter “A,” scan the barcode corresponding to the letter “A” on page 34. The letter “A” will always appear in your data as prefix or suffix to the barcode value.

4)Scan the corresponding 'Pre/Postamble' barcode on this page to exit this setting.

Clear Pre/Postamble

P r e a m b l e

P o s t a m b l e

12