Manuals / WatchGuard Technologies / Computer Equipment / Network Hardware

WatchGuard Technologies 480-2524-001 manual Design for Manufacturing and Environment Document

Models: 480-2524-001

1 10

Download 10 pages 25.75 Kb

Page 1

Image 1

Design for Manufacturing and Environment Document

Firebox V10

De-manufacturing

Instructions

Document Number: 480-2524-001

WatchGuard Technologies.Doc #480-2524-001 Rev. A Page 1 of 10 Authorization and Revision History for this document is available in the WatchGuard ECO system

Page 1

Image 1

WatchGuard Technologies 480-2524-001 manual Design for Manufacturing and Environment Document, Document Number

Contents

Firebox De-manufacturing Instructions Design for Manufacturing and Environment DocumentDocument Number 2.0 Scope Design for Manufacturing and Environment Document 1.0 PurposeProduct Family Name Family part #’s not necessarily inclusive3.1 -Remove labels, rubber feet and screws Design for Manufacturing and Environment Document 3.0 InstructionMaterial removed part Desc or P/N & material type Instruction visual3.3 -Disassemble display module Upper housingDisengage press fit display from upper housing with fingers Design for Manufacturing and Environment DocumentLens Components Flex CircuitDesign for Manufacturing and Environment Document Material removed part Desc or P/N & material typeMaterial removed P/N & material type Lower housing3.2 -Disconnect PCBA Posts and Remove from Interconnect PCBA Remove standoffs -2 ea Separate PCBA from lower housingLocking posts Interconnect PCBADisconnect PCBA from base housing, 5 places Design for Manufacturing and Environment DocumentBattery -coin cell 0301-001- Manganese oxide / Lithium CR2032 3.3 - Remove battery from Main PCBARemove Battery from clip Design for Manufacturing and Environment DocumentBase housing 0775-001- PC/ABS FR110 EMI Shield 3.2 -Disconnect PCBA Connector and Separate PCBA, EMI Shield and BaseMain PCBA Locking posts 0776-001- Nylon 2 eaWatchGuard Technologies.Doc #480-2524-001 Rev. A Page 10 of 4.0 Applicable Documents 5.0 Revision HistoryDesign for Manufacturing and Environment Document REVISED SECTION