Manuals / WatchGuard Technologies / Computer Equipment / Network Hardware

WatchGuard Technologies 480-2524-001 manual Material removed P/N & material type, Lower housing

Models: 480-2524-001

1 10

Download 10 pages 25.75 Kb

Page 6

Image 6

Design for Manufacturing and Environment Document

3.4–Remove Connector Hex Head Standoffs and separate PCBA Assembly from Lower Housing

Material removed (P/N & material type)

Stand-offs xxxx-0xx – Hex-head

stainless steel; 2 ea.

Instruction visual

Lower housing

0789-001- PC/ABS FR110

Remove standoffs -2 ea.

Separate PCBA from lower housing

3.2 –Disconnect PCBA Posts and Remove from Interconnect PCBA

WatchGuard Technologies.Doc #480-2524-001 Rev. A Page 6 of 10 Authorization and Revision History for this document is available in the WatchGuard ECO system

Page 6

Image 6

WatchGuard Technologies 480-2524-001 manual Material removed P/N & material type, Lower housing, Instruction visual

Contents

Design for Manufacturing and Environment Document Firebox De-manufacturing InstructionsDocument Number Product Family Name Design for Manufacturing and Environment Document 1.0 Purpose2.0 Scope Family part #’s not necessarily inclusiveMaterial removed part Desc or P/N & material type Design for Manufacturing and Environment Document 3.0 Instruction3.1 -Remove labels, rubber feet and screws Instruction visualDisengage press fit display from upper housing with fingers Upper housing3.3 -Disassemble display module Design for Manufacturing and Environment DocumentDesign for Manufacturing and Environment Document Flex CircuitLens Components Material removed part Desc or P/N & material type3.2 -Disconnect PCBA Posts and Remove from Interconnect PCBA Lower housingMaterial removed P/N & material type Remove standoffs -2 ea Separate PCBA from lower housingDisconnect PCBA from base housing, 5 places Interconnect PCBALocking posts Design for Manufacturing and Environment DocumentRemove Battery from clip 3.3 - Remove battery from Main PCBABattery -coin cell 0301-001- Manganese oxide / Lithium CR2032 Design for Manufacturing and Environment DocumentMain PCBA 3.2 -Disconnect PCBA Connector and Separate PCBA, EMI Shield and BaseBase housing 0775-001- PC/ABS FR110 EMI Shield Locking posts 0776-001- Nylon 2 eaDesign for Manufacturing and Environment Document 4.0 Applicable Documents 5.0 Revision HistoryWatchGuard Technologies.Doc #480-2524-001 Rev. A Page 10 of REVISED SECTION