Manuals / WatchGuard Technologies / Computer Equipment / Network Hardware

WatchGuard Technologies 480-2524-001 Remove labels, rubber feet and screws, Instruction visual

Models: 480-2524-001

1 10

Download 10 pages 25.75 Kb

Page 3

Image 3

Design for Manufacturing and Environment Document

3.0Instruction

3.1-Remove labels, rubber feet and screws

Material removed (part Desc or P/N & material type)

Labels Cert. label:

0791-00x– Metalized poly-film

Warranty void: 0230-001 - Poly-film

Serial number: 0812-00x - Poly-film

Product UPC: 0813-00x - Poly-film

Rubber Feet 0428-002 - PSA clear; 4

ea.

Instruction visual

Remove rubber feet

Remove labels

Screws

0792-001 - Phillips head; steel; 4 ea.

Remove screws, 4 ea.; one under warranty void label

3.2 –Disengage top from display and disconnect display from Interconnect PCBA

WatchGuard Technologies.Doc #480-2524-001 Rev. A Page 3 of 10 Authorization and Revision History for this document is available in the WatchGuard ECO system

Page 3

Image 3

WatchGuard Technologies 480-2524-001 Design for Manufacturing and Environment Document 3.0 Instruction, Instruction visual

Contents

Design for Manufacturing and Environment Document Firebox De-manufacturing InstructionsDocument Number Family part #’s not necessarily inclusive Design for Manufacturing and Environment Document 1.0 Purpose2.0 Scope Product Family NameInstruction visual Design for Manufacturing and Environment Document 3.0 Instruction3.1 -Remove labels, rubber feet and screws Material removed part Desc or P/N & material typeDesign for Manufacturing and Environment Document Upper housing3.3 -Disassemble display module Disengage press fit display from upper housing with fingersMaterial removed part Desc or P/N & material type Flex CircuitLens Components Design for Manufacturing and Environment DocumentRemove standoffs -2 ea Separate PCBA from lower housing Lower housingMaterial removed P/N & material type 3.2 -Disconnect PCBA Posts and Remove from Interconnect PCBADesign for Manufacturing and Environment Document Interconnect PCBALocking posts Disconnect PCBA from base housing, 5 placesDesign for Manufacturing and Environment Document 3.3 - Remove battery from Main PCBABattery -coin cell 0301-001- Manganese oxide / Lithium CR2032 Remove Battery from clipLocking posts 0776-001- Nylon 2 ea 3.2 -Disconnect PCBA Connector and Separate PCBA, EMI Shield and BaseBase housing 0775-001- PC/ABS FR110 EMI Shield Main PCBAREVISED SECTION 4.0 Applicable Documents 5.0 Revision HistoryWatchGuard Technologies.Doc #480-2524-001 Rev. A Page 10 of Design for Manufacturing and Environment Document