Manuals / WatchGuard Technologies / Computer Equipment / Network Hardware

WatchGuard Technologies 480-2524-001 manual Scope, Product Family Name, Firebox

Models: 480-2524-001

1 10

Download 10 pages 25.75 Kb

Page 2

Image 2

Design for Manufacturing and Environment Document

1.0Purpose

This instruction defines the de-manufacturing process for the recovery of this product family as it pertains to recycling of the major product components.

2.0Scope

This instruction applies to the following product family and family part numbers.

Product Family Name	Family part #’s (not necessarily inclusive)
Firebox V10	• Firebox V10; all revisions

WatchGuard Technologies.Doc #480-2524-001 Rev. A Page 2 of 10 Authorization and Revision History for this document is available in the WatchGuard ECO system

Page 2

Image 2

WatchGuard Technologies 480-2524-001 manual Design for Manufacturing and Environment Document 1.0 Purpose, Scope, Firebox

Contents

Document Number Design for Manufacturing and Environment DocumentFirebox De-manufacturing Instructions Product Family Name Design for Manufacturing and Environment Document 1.0 Purpose2.0 Scope Family part #’s not necessarily inclusiveMaterial removed part Desc or P/N & material type Design for Manufacturing and Environment Document 3.0 Instruction3.1 -Remove labels, rubber feet and screws Instruction visualDisengage press fit display from upper housing with fingers Upper housing3.3 -Disassemble display module Design for Manufacturing and Environment DocumentDesign for Manufacturing and Environment Document Flex CircuitLens Components Material removed part Desc or P/N & material type3.2 -Disconnect PCBA Posts and Remove from Interconnect PCBA Lower housingMaterial removed P/N & material type Remove standoffs -2 ea Separate PCBA from lower housingDisconnect PCBA from base housing, 5 places Interconnect PCBALocking posts Design for Manufacturing and Environment DocumentRemove Battery from clip 3.3 - Remove battery from Main PCBABattery -coin cell 0301-001- Manganese oxide / Lithium CR2032 Design for Manufacturing and Environment DocumentMain PCBA 3.2 -Disconnect PCBA Connector and Separate PCBA, EMI Shield and BaseBase housing 0775-001- PC/ABS FR110 EMI Shield Locking posts 0776-001- Nylon 2 eaDesign for Manufacturing and Environment Document 4.0 Applicable Documents 5.0 Revision HistoryWatchGuard Technologies.Doc #480-2524-001 Rev. A Page 10 of REVISED SECTION

Design for Manufacturing and Environment Document

2.0Scope

Product Family Name

Family part #’s (not necessarily inclusive)

Firebox V10

• Firebox V10; all revisions