Type

Sets the Compression type, which determines the signal source being fed to the RMS detector.

•In New (Feed Forward) mode, the compressor works like newer VCA-based compressors. The RMS detector sends a signal to the VCA that is an exact ratio of the desired compression, set by the ratio control.

•In Old (Feed Back) mode, the RMS detector receives a signal from the VCA output, and then feeds the VCA a signal based on the set signal ratio.

Waves API 2500 User Manual

- 7 -

Page 7

Image 7

Contents

Waves API TABLE OF CONTENTS 1.1 Welcome Chapter 1 - Introduction 1.2 Product Overview Knee 1.3 Concepts and Terminology Thrust Type 1.4 Components Chapter 2 - Quickstart Guide 3.1 Compressor Section Chapter 3 - Controls and Interface Threshold 3.2 Tone Section L/R Link 3.3 Link SectionShape Meters 3.4 Meter DisplayClip LED Switchable Display Modes Analog 3.5 Output SectionDefault Default Turns Auto Make-UpGain on and off DefaultDefault Make-Up 4.1 The WaveSystem Toolbar 4.2 Preset HandlingPreset Types Chapter 4 - The WaveSystem Save to New File… Loading Presets and SetupsSaving Presets and Setups Put into Preset Menu As… Toggle Buttons Deleting Presets4.3 Interface Controls A/B Comparison and Copying Multiple Selection of Controls Value Window ButtonsSliders Hover BoxPage Appendix A - API 2500 Controls

Waves 2500 user manual Type

Models: 2500

Type

Waves API 2500 User Manual