cleared, it will automatically begin scanning. The sound output will remain uncorrected during the scan, but an orange highlight will appear to indicate that scanning in progress.
PITCH CORRECTION AND PITCH CURVE EDITING
After a section is scanned and its correction curve and note segmentation are created, you can play back the section to apply and hear the correction. Audition through the track’s assigned output. You can now select notes, sections or the entire piece and begin adjusting the correction curves.
Use the default Note tool to make a selection in the Tune graph. Select a single note by clicking on it or select multiple notes by clicking outside and dragging over the area you would like to select. The Select All button allows you to quickly select the entire curve with all its notes.
During the scan, Tune scans the track and applies default correction parameters for the construction of the correction graph. Choosing Select All is a convenient way to choose your own custom parameters rather than the automatic defaults. Once all segments are selected you can change the Segmentation and Correction Parameters. Increasing Note Tolerance in the Segmentation section, for example, will reduce the amount of false note transitions in places where the singer went off key momentarily.
When you are satisfied with the segmentation settings, you can increase or decrease any of the Correction Parameters for tighter or more relaxed correction. The results are animated and auditioned in real time. Once you are happy with the overall correction, you can make local adjustments to sections or individual notes using the Correction Parameters and Graphic Tools.
SO MUCH FOR THE QUICK START
The Tune interface is logical and intuitive, so with a bit of trial and error and a good pair of ears you should quickly be able to achieve quality results. But to get the most from the product, please read the rest of this manual.
The next chapter will take you through Tune’s interface and describe each control. After that, in the chapter “Working with Tune,” you’ll find comprehensive instructions describing how to control Tune in greater detail.
