Waves Q-Clone manual Save your EQ to a new preset file anywhere on your computer

10.Calibrate the Q-Capture with your EQ device as instructed in the Calibration chapter on page 11.

11.On an Audio track (the one that you want to process) insert the Q- Clone (Mono or Stereo, according to the track). You must bypass all other plug-ins on the track while you are “EQ-ing” it.

12.When the Q-Cloneis open, click the Capture button to start receiving the cloning image from the EQ device. You will see the orange line on your display graph showing the present EQ curve.

13.Play this track (solo it or play it with the entire session) and start building your EQ setup by adjusting the parameters (“tweaking” the knobs) on the hardware EQ device.

14.Once you reach your desired EQ, click on the Hold button to engage Hold mode.

15.Now there are a few options to choose from:

A.Save your EQ to a new preset file anywhere on your computer

– Click the “Save” button on the Waves menu bar and choose “Save To New File”. This saves a preset file to any desired directory on your computer.

B.Save your EQ to your Waves Preset Menu - Click the “Save” button on the Waves menu bar and choose “Put Into Preset Menu As…” This will allow you to load your new preset anytime you open the Waves Q-Clone preset menu.

C.Reset – Reset the preset by loading the reset preset file from the Load menu.

Waves Q-Clone Manual 25