jamb, fit the weatherstrip up tight against the temporarily attached weatherstrip in the header and flush with the inside edge of the jamb. Temporarily secure the weatherstrip with equally spaced nails. Repeat for other side. This will keep the bottom section from falling out of the opening during installation. Equally space nails approximately 12” to 18” apart.

For Fully Adjustable track: For the header, align the weatherstrip 1/8” to 1/4” inside the header edge, and temporarily secure it to the header with equally spaced nails. Starting at either side of the jamb, fit the weatherstrip up tight against the temporarily attached weatherstrip in the header and 1/8” to 1/4” inside the jamb edge. Temporarily secure the weatherstrip with equally spaced nails. Repeat for other side. This will keep the bottom section from falling out of the opening during installation. Equally space nails approximately 12” to 18” apart.

Headroom requirement: Headroom is defined as the space needed above the top of the door for tracks, springs, etc. to allow the door to open properly. If the door is to be motor operated, 2-1/2” (64 mm) of additional headroom is required.

Note: 6” low headroom conversion kit is available for 12” radius only. Contact your local Wayne-Dalton dealer.

Backroom requirement: Backroom is defined as the distance needed from the opening back into the garage to allow the door to open fully.

Backroom Requirements

DOOR HEIGHT

TRACK

MANUAL LIFT

MOTOR OPERATED

 

 

 

 

6’5” to 7’0”

12”,15” Radius

98” (2489 mm)

125” (3175 mm)

 

 

 

 

7’1” to 8’0”

12”,15” Radius

110” (2794 mm)

137” (3480 mm)

 

 

 

 

Headroom Requirements

 

 

 

 

 

 

TRACK TYPE

 

SPACE NEEDED

 

 

 

 

 

15” Radius track

 

14-1/2” (368 mm)

 

 

 

 

 

12” Radius track

 

12-1/2” (318 mm)

 

 

 

 

 

6” LHR Kit

 

9” (229 mm)

 

 

 

 

 

 

 

 

 

Min. Side

 

Suitable mounting surface

Headroom

room

 

Clearance

 

2”x 6” lumber minimum

 

 

is 3 1/2”

 

Header board 2”x 6”

 

 

 

 

lumber preferred

 

 

 

Backroom

 

 

 

header

Nail

Min. Side

 

 

 

 

Level

 

 

room

 

 

 

Clearance

eatherstrips

Finished

 

 

is 3 1/2”

Door

 

 

 

Height

 

 

 

W

 

 

 

 

 

 

 

 

 

Plumb

Finishedwidth

 

 

 

jambs

 

 

 

 

Door

 

 

Weather-

 

 

 

 

 

 

 

 

 

Jamb

strips

 

 

 

 

 

 

 

 

 

Quick Install track

 

 

Jambs

 

 

Weather-

 

 

 

 

Jamb

strips

 

 

 

 

 

 

 

 

 

Fully Adjustable track

1/8” to 1/4”

5

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer,

refer to your local yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com

Page 5
Image 5
Wayne-Dalton 346918 Headroom Requirements, Radius track 14-1/2 368 mm 12-1/2 318 mm LHR Kit 229 mm