Bolts and nuts Perforated angle, To 7/8

Sound framing members

Horizontal track

5/16”-18 x 1-1/4” Hex bolt must extend into the track to serve as a roller stop

Perforated angle bolted using (2) 5/16” x 1-5/8” hex head lag screws to ceiling member and parallel to door

(3) 5/16” Bolts and nuts

(3) 5/16”

Bolts and nuts

Horizontal track

Perforated angle

5/16”-18 x 1-1/4” Hex bolt must extend into the track to serve as a roller stop

Sound framing members

Perforated angle bolted using (2) 5/16” x 1-5/8” hex head lag screws to ceiling member and parallel to door

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer,

refer to your local yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com

Image 14

Contents

6100 B l e O f C o n t e n t s Representations of the door parts. Each speciﬁc door Important Safety Instructions Tools Required Found not to be sound, must be replaced Attempt is made to start removing an existing doorLock Section can be identified by #2 graduated end hinges Mounting surface with nails Headroom Requirements Radius track 14-1/2 368 mm 12-1/2 318 mm LHR Kit 229 mmPage Tools None Lift HandlesPull Handles Stacking Sections Bottom SectionVertical Tracks Level, Step ladder Drawbar Operator Bracket Top FixturesStrut A-symmetrical Horizontal Tracks/F.A. Flag Angles Top SectionHorizontal Tracks/Q.I. Flag Angles End Bearing Brackets Tape measure, Pencil Center Bracket Bushing AssemblyTorsion Spring Attachment Tools Step Ladder Winding Springs Securing Door for Spring WindingsCounterbalance Lift Cables Check the door for level Rear Back HangsThis manual 16 Bolts and nuts Perforated angle To 7/8 Pull Down Rope Door Arm HookupInside Lock Following cleaning solution is recommended Touch up where necessaryWood Maintenance and Refinishing Use in general cleaning of garage doorsPage Warranty Lifetime Limited Warranty Model