13
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local
yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com
Tools Needed:
INSTALLATION
Power Drill
7/16” Socket Driver
u-bar
NOTE: For door section identification see Page 4.
Refer to the u-bar schedule to determine the required
number of u-bar(s), and placement on each section.
NOTE: U-Bars are typically placed flush against the
upper or lower hinge leafs, except on the bottom of
the bottom section, and top of the top section.
Place the sections face down on a couple of
sawhorses or flat clean/ smooth surface. Butt the
sections together in the proper stack sequence and
flip up the hinges. Position the u-bars according to
the u-bar schedule, and flush against the hinge leafs
(or just above the bottom brackets on the bottom
section, if applicable). Center the u-bars side to side
on the section, and secure using (2) 1/4” -14 x 7/8”
self drilling screws at each end stile and center stile
location. Repeat for all other sections except the top
of the top section.
INSTALLATION ON ThE TOP SECTION: Position the
u-bar above the top bracket assembly. Center the u-
bar side to side on the section, and secure using (2)
1/4” - 14 x 7/8” self drilling screws at each end stile
and center stile location.
U-BAR PLACEMENT FOR TOP SECTION
U-bar
hinge
U-BAR PLACEMENT FOR LOCk AND INTERMEDIATE SECTIONS
U-bar
Attaching
center
stile
(2) 1/4”- 14 x 7/8” Self drilling screws
hinge
U-BAR PLACEMENT FOR BOTTOM SECTION
(2) 1/4”- 14 x 7/8”
Self drilling screws
Top bracket
assembly
U-bar
Top section
U-bar
Bottom
section
Bottom bracket
assembly
(2) 1/4”- 14 x 7/8”
Self drilling screws
u-bar Schedule
Door height
# of sections
Section
Position of
u-bar on
section
Specification Options Code
1100/1101 1102 1103 1104 1120/1121 1122 1123/1124 1125 1140 1141 1142 1143/1144
6’- 0” to
7’- 0” 4
Bottom
Bottom X X X X
Top X X X X X X X X X X X
Lock
Bottom X X X X
Top X X X X X X X X X X
Intermediate I
Bottom X X X X X X X
Top X X X X X X X X X X X
Top
Bottom X X
Top X X X X X X X X X X X
7’- 6” to
8’- 0” 5
Bottom
Bottom X X X X
Top X X X X X X X X X X X
Lock
Bottom X X X X
Top X X X X X X X X X X
Intermediate I
Bottom X X X X X X X
Top X X X X X X X X X X X
Intermediate II
Bottom X X X X X
Top X X X X X X X X X X X X
Top
Bottom X X X X X X
Top X X X X X X X X X X X
U-bar
U-bar
(2) 1/4”- 14 x 7/8”
Self drilling screws