21
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local
yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com
Tools Needed:
Tools Needed:
INSTALLATION
Left hand cable
drum red
Right hand wound
Red winding cone
Left hand side
Nylon center
bracket bushing
Torsion
tube Left hand wound
Black winding cone
right hand side
Right hand
cable drum
black
Torsion
assembly
End bearing
bracket
Torsion
assembly
Center
bracket
Equal
spacing

Torsion Spring Assembly

Continued...

Slide the nylon center bushing onto the torsion tube
followed by the springs and cable drums. The nylon
center bushing, springs and cable drums must be
positioned, as shown.
With assistance, pick up the torsion assembly and
slide one end of the tube through one end bearing
bracket. Lay the torsion tube into the center bearing
bracket and slide the other end of the tube into the
opposite end bearing bracket. Position the torsion
tube so that equal amounts of the tube extend from
each end bearing bracket.
Slide the nylon center bushing into the stationary
spring cone at the end of the spring and align the
stationary spring cone(s) with the holes in the center
bearing bracket. Secure the spring(s) to the center
bearing bracket with (2) 3/8”-16 x 1-1/2” hex head
bolts and 3/8”-16 nuts.
IMPORTANT: SPRINGS UNDER TENSION CAN BE
DANGEROUS.
IMPORTANT: ThE SPRING WARNING TAG(S)
SUPPLIED MUST BE SECURELY ATTAChED TO ThE
STATIONARY SPRING CONE IN PLAIN VIEW. ShOULD A
REPLACEMENT SPRING WARNING TAG BE REqUIRED,
CONTACT WAYNE-DALTON FOR FREE
REPLACEMENTS.
22 Nylon Center bushing
Torsion
spring
(1) 3/8”-16 x 1-1/2”
hex head bolt
(1) 3/8”-16 Nut
(1) 3/8”-16 x 1-1/2”
hex head bolt
(1) 3/8”-16
Nut
Center bearing bracket
Torsion
spring
Torsion spring
Nylon center
bushing
Center bearing
bracket
Spring warning
tag
Stationary
spring cone
Stationary
spring cone
Step Ladder
9/16” Socket
Ratchet Wrench
9/16” Wrench
Torsion
spring
Spring
warning
tag