Wayne-Dalton HA-04WD operating instructions 2Installation, Installation continued

2Installation

4.To manually turn ON the HA-04WD Outdoor Lighting

Module, press and release the	GREEN LED
Program/ON/OFF button. The
green indicator LED will turn ON,
and the lamp, appliance or other
electronics module plugged into
the HA-04WD Outdoor Lighting
Module will also turn ON.
	O
	ON/ FF
	PROGRAM

Installation

Installation

3 Installation (continued)

5.To manually turn OFF the HA-04WD Outdoor Lighting Module, simply press and release the Program/ON/OFF button. The green indicator will turn OFF and the lamp, appliance or other electronic device plugged into the HA-04WD Outdoor Lighting module will also turn OFF.

Note: If the device does not turn ON, confirm the power switch for your device is turned to the “ON” position.

Note: This module must be mounted in a vertical position with the receptacle facing downward and with the receptacle not reaching ground level.

PROGRAM ON/OFF BUTTON

5

GREEN LED

ON/ OFF

PROGRAM

PROGRAM ON/OFF BUTTON

6