Step 16
Install Lid
You will need: lid, two hinge pins and two hair pin cotters.
Set the lid in place. Align the hinges at the rear of the barbecue. Insert hinge pins from the outside. Insert hair pin cotters into the small holes in the hinge pins. Figure 21.
Hair pin cotter
Hinge pin
Figure 21
Step 17
Install the condiment basket
You will need: condiment basket and end bracket.
Insert one wire end of the condiment basket into the hole in the side frame. Figure 22 (a). Insert the opposite wire end of the condiment basket into the hole in the end bracket. Hold the end bracket at an angle so the lower tab is inside the frame tube. Push the bracket into the frame. Figure 22 (b). Check to see that the lower tab of the bracket is hooked in the slot in the frame. Figure 22 (c).
To fully seat the bracket, you may have to tap it lightly with a hammer.
mWARNING: If the end bracket is in any way cracked or damaged, do not use the condiment basket. Call our Customer Service Center to order a new part.
Wire end
(a)
(b)
(c)
Slot in frame
(view from below)
Figure 22
18
