Step 2
Assemble the frame
You will need: left frame, right frame, two nylon washers, two
Note - Work on carpeted area (on grass, or on one of the boxes) to protect the finish during frame assembly.
Put the frame pieces so the leg tabs are up. Put the right frame to your right and left frame to your left. Figure 1.
Slip the two frame halves together with the tabs inside, until the tabs of the right frame are inside the left frame and the holes align. Figure 1 (a).
Slip washers over bolts; insert and tighten bolts. (If you try to insert a bolt and there are no holes, you have the left frame turned the wrong way. Turn the left frame around.) Figure 1 (b).
(a)
(b)
Figure 1
Step 3
Continue frame assembly
You will need: frame assembly, two side frames, four
Assemble one side frame onto the leg tabs of the right frame, and the second side frame onto the leg tabs of the left frame. Make sure the anchoring base plates are facing in toward each other. The tabs must be on the inside of the frames when the joints are closed.
Add front panel with the large hole down and to your right. Add washers, then bolts. Do not fully tighten these bolts. You will tighten them once the base is anchored. Figure 2 (a).
Turn frame assembly right side up.
(a)
Anchoring base
plates are facing in
Do not fully tighten
these bolts
Figure 2
13
