Weber 3500 owner manual Step, Install the accessory rack, Complete accessory installation

Step 24

Install the accessory rack

You will need: accessory rack.

Rest the left end of the accessory rack on the base panel. Figure 37 (a).

Insert the right hooks into the right side frame slots. Figure 37 (b).

Raise the left end up and slide left hooks into the left side frame slots. Figure 37.

Left side

frame slots

(a)

(b)

Left hooks

Figure 37	Right side
	frame

Step 25

Complete accessory installation

You will need: Warm-Up Basket, warming rack, work table, three tubing plugs, thermometer and a hammer.

Insert one end of the Weber Warm-Up Basket into the hole in the right end of the lid and the other end into the slot in the left end of the lid. Figure 38 (a).

Set the warming rack into the slots at the rear of the cooking box. Figure 38 (b).

Set the work table onto the left side rails. Figure 38 (c).

Insert the thermometer into its holder. Figure 38 (d).

Insert the tubing plugs into the ends of the frame. To fully seat the plugs, you may have to tap them lightly with a hammer. Figure 38 (e).

(a)

(b) (d)

(c)

(e)

Figure 38

27