Weber 41081 manual Crossover Ignition System Operations

9) Reinstall the Spider Stopper Guards. Slightly	Crossover® Ignition System Operations
rotate the Spider Stopper Guards so that the	If the Crossover Ignition System fails to ignite the Left
seams are in line with the Venturi fins(1). There	burner, light the Left burner with a match. If the Left
should be no gaps in the seams or in the fit around	burner lights with a match, then check the Crossover
the burners(2) and valves(3).	Ignition System.
	■ Check that both the white(1) and black(2) ignition
	wires are attached properly.

(1)

(3)

(1) (2)

(2)

m CAUTION: If the Spider Stopper Guards do not
fit tightly, contact the Customer Service Represen-	■ Check that the Crossover Ignition button pushes the
tative in your region using the contact information	igniter (button) down, and returns to the up position.
sheet provided with your manual.	■ Check to see if the igniter is loose in the frame.
m WARNING: After reinstalling the gas lines, they	Tighten if necessary; See Step “Install igniter” for
should be leak checked with a soap and water	correct procedure.
solution before using the barbecue. (See Step:	If the Crossover Ignition System still fails to light,
“Check for gas leaks.”)	Contact the Customer Service Representative in your
	region using the contact information sheet provided
	with your manual.

D-12