OPERATING
Manually Lighting the Side Burner | Replace Igniter Batteries |
DANGER
Failure to open the lid while igniting the side burner, or not waiting 5 minutes to allow the gas to clear if the side burner does not light, may result in an explosive
1)Open the side burner lid.
2)Check that the side burner valve is turned OFF. (Push the knob down and turn clockwise to ensure that it is in the off position.).
3)Turn the gas supply valve on.
4)Put match in a match holder and strike match.
5)Push down and turn the side burner control valve to START/HI.
6)Hold match holder and lit match by right side of side burner.
7)Push igniter button and hold until burner ignites. You will hear the igniter sparking.
CAUTION: Side burner flame may be difficult to see on a bright sunny day.
WARNING: If the side burner does not light:
1)Turn OFF the side burner control valve.
2)Wait 5 minutes to let the gas clear before you try again or try to light with a match.
To Extinguish
Push down and turn each burner control knob clock- wise to the OFF position. Turn gas supply OFF at the source.
Parts required: 1 AA alkaline battery per igniter.
Unscrew igniter button from top of control panel. Remove igniter button and contact spring. Remove old battery and replace with a new AA alkaline battery. Positive end(1) of battery faces up as shown in illustration. Replace spring contact(2) and screw igniter button(3) back down.
9
