Step 14
Install tank panel assembly
You will need: tank panel assembly.
Slide the side burner back. Insert the tabs into the slots in the frame brace at the wheel legs. (Make sure the side burner hose is to the front of the barbecue.) Figure 17 (a). Slide up until the notch at the bottom of the tank panel fits over the cross brace. Figure 17 (b).
Slot in frame brace
(a)
Frame brace
Tabs on tank panel
Side burner | (b) | |
hose | ||
|
Figure 17
Cross brace 
Step 15
Install right end panel
You will need: right end panel (Number 3),
Set the right end panel in place with the flange at the top facing away from the barbecue, and the bottom flange under the frame brace. Figure 18.
Make sure the gas supply hose is on the outside of the panel. Put washer on bolt and insert bolt through both panels and frame brace. Add washer and hex nut and tighten. Figure 18.
Hose and regulator
Side burner hose
Figure 18
17
