![](/images/new-backgrounds/1308514/30851453x1.webp)
Step 29
Install the lid
You will need: lid, two hinge pins and two hair pin cotters.
Set the lid in place. Align the hinges at the rear of the barbecue. Insert hinge pins from the outside. Insert hair pin cotters into the small holes in the hinge pins. Figure 44.
Hair pin cotter
Hinge pin
Figure 44
Step 30
Install tool holders, control panel, burner control knobs and FlameCheck button
You will need: three tool holders, control panel, three burner control knobs and FlameCheck button.
Hook the tool holders over the frame rail. Figure 45.
Set the control panel in place over both frame braces. (Hold the Crossover Ignition button up while setting the control panel in place.) Place your thumbs over the control panel
Push on the burner control knobs and FlameCheck button. Figure 45 (b).
Hole in frame brace
(a)
Control panel
(b)
Tool holders
Figure 45
27