Weber 5500 owner manual Assembly, Step, Check package contents

Assembly

Tools needed

Screwdrivers, regular and

Phillips

Hammer

Two 7/16 inch, one 5/8, 11/16, and 3/4 inch open end or two adjustable wrenches

Step 1

Check package contents

Cooking box (assembly)

Lid (assembly)

® ®

Pliers

Level

Electric drill

Supplies needed

You will need a soap and water solution to check for gas leaks. (See Step "Check for gas leaks.")

Note - The hardware size of nuts, bolts, and screws is given. For example "1/4-20 x 2 inch bolt" means a bolt 1/4 inch in diameter with 20 threads to the inch, 2 inches long. On a small screw for example, "6-32 x 1/2 inch screw" means a number 6 screw, with 32 threads to the inch, 1/2 inch long.

While we give much attention to our products, unfortunately an occasional error may occur.

If a part is missing, do not go back to the store. Call the Weber Customer Service Center toll free

1-800-446-1071to receive immediate assistance. Have your owner’s manual and serial number of the barbecue available for reference.

Bottom tray

Front panel

Accessory tray

Accessory tray with notch

Control panel

11