Repeat the procedure with the other two back panels. When in place they should be flush with each other. Figure 14.
Right upright
Left upright
Figure 14
Step 13
Install bottom accessory trays
You will need: two accessory trays.
Set the accessory tray without the “notched” board between the two frame connectors. Set the accessory tray with the notched board halfway in place to hold the back panels in position. Figure 15.
Notched accessory tray
Figure 15
Step 14
Install side burner locks
You will need: frame assembly, two side burner locks and a 7/16 inch wrench.
Loosen the right rear 1/4 x 20 bolt. Install the side burner lock. The “U” shape cut out of the lock slips down over the bolt. Tighten with a wrench. Figure 16 (a).
Loosen the right front 1/4 x 20 bolt. The side burner lock fits between the front panel and the frame.
The “U” shape cut out slips up over the bolt. Tighten with a wrench. Figure 16 (b).
(a) | (b) |
Figure 16
21
