INSTALL CONDIMENT HOLDERS AND WORK SURFACES
You will need: two condiment holders and two stainless steel work surfaces.
Place the condiment holders on the ends of the frame. Set the work surfaces on top of the condiment holders and the barbecue frame. Figure 18.
CHECK FOR GAS LEAKS
WARNING
The gas connections of your Weber Gas Barbecue have been factory tested. We do however recommend that you leak check all gas connections before operating your Weber Gas Barbecue.
Remove burner control knobs, control panel and front panel
Remove the burner control knobs. The control panel is separate from the front panel. The control panel needs to be removed before the front panel can be removed. Figure 19.
Control 
panel
Figure 18
Front panel
Figure 19
Put your fingers under the front edge of the control panel, lift up, and pull evenly toward you. Figure 20 (a).
Front edge of the control panel
(a)
Front Panel
Control Panel
Figure 20
10
