Weber 625 manual Tools Needed Remove Packaged, Contents, Supplies Needed

TOOLS NEEDED	REMOVE PACKAGED
7/16 and 3/4 inch open end or an adjustable wrench	CONTENTS
	Right panel
	(Summit 450 and 650 only)

SUPPLIES NEEDED

Your LP tank is shipped empty for safety. After setting the LP fuel scale you will need to fill it. (See Step "Fill LP tank.")

You will need a soap and water solution to check for gas leaks. (See Step "Check for gas leaks.")

Note - The hardware size of nuts, bolts and screws is given. For example "1/4-20 x 2 inch bolt" means a bolt 1/4 inch in diameter with 20 threads to the inch, 2 inches long. On a small screw for example, "6-32 x 1/2 inch screw" means a number 6 screw, with 32 threads to the inch, 1/2 inch long.

While we give much attention to our products, unfortunately an occasional error may occur. If a part is missing, do not go back to the store. Call the Weber Customer Service Center toll free 1-888-33-SUMMIT(1-888-337-8664) to receive immediate assistance. Have your owner’s manual and serial number of the barbecue available for reference.

Note: If you are interested in installing a Summit 4 burner or 6 burner into a built-in unit, call 1-888-33-SUMMIT for warnings, dimensions, and installation instructions for the Summit 475 or 675.

1/4-20 x 1/2 inch bolt (2)

Nylon washer (4)

Plastic plug (2)

(Summit 450 or 650 only)

1/4-20 keps nut (2)

Flavorizer bar

(7)(Summit 425 or 450)

(11)(Summit 625 or 650)

Optional Steam-N-Chips smoker

Note: If you use the Steam-N- Chips Smoker, you will be removing one of the Flavorizer bars. You have a full set of Flavorizer bars to use when not using the Steam-N-Chips smoker.

Cooking grate

(2)(Summit 425 or 450)

(3)(Summit 625 or 650)

Warm-up basket

Burner control knob

(4)(Summit 425 or 450)

(6)(Summit 625 or 650)

Bottom tray

3