REMOVE PACKAGED CONTENTS (CONTINUED)
Catch pan holder
Catch pan
Drip pan
Stainless steel bottom shelves (For Summit 425 and 625)
Wire bottom rack
(For Summit 450 and 650)
Stainless steel work surface (2)
Condiment holder (2)
ADD COOKING MODULE
Caution: Use two people to lift and install the cooking module.
Lift the cooking module out of the packaging. The gas line, regulator, and bracket will hang below the module.
Lower the module on an angle into the cart so the control panel is under the front top frame rail. Figure 2. Guide the gas line regulator and bracket while lowering the module into the cart.
Flange
View from
right
Figure 2
Lower the back of the cooking module down so it is between the two flanges in the back panel. Figure 3. Use caution not to scratch the paint of the cooking module when setting the module between the flanges.
The cooking module should be level, setting on the front and rear top frame rails.
Flange
Tool holder (4)
Front top frame rail
Rear top frame rail
Hose
View from
right
Figure 3
4
