Weber 80045 1299, Gas Go Anywhere manual Install Igniter, Mdanger

Install Igniter

Insert the igniter electrode and two 10-24 screws through the igniter bracket

and the holes in the bottom unit on the side opposite the regulator.

Add washers and wing nuts, making sure that the wing nuts are secured in

a vertical position.

The igniter electrode has been pre-bent. It may need to be adjusted so the tip is approximately 1/8 inch from the holes in the burner tube.

mDANGER

Make sure the tip of the igniter wire is adjusted to the holes in the burner tube. If it is not adjusted properly, gas can accumulate in the barbecue while igniting the barbecue. Delayed ignition of the accumulated gas may occur. This will result in a fire or explosion which can cause serious bodily injury or death, and damage to property.

6