Weber SILVERC GENESIS Gas Grill, 55054 0100 manual Install Flavorizer Bars and Cooking Grates

Check:		Install Flavorizer® Bars and Cooking Grates
1)	Hose to manifold connection	You will need: five Flavorizer Bars and two cooking
2)	Manifold to side burner hose connection	grates.
m WARNING: If there is a leak at connection(1),		Place the Flavorizer Bars side by side in the cooking
retighten the fitting with a wrench and recheck for		box.
leaks with soap and water solution.
If a leak persists after retightening the fitting, turn
OFF the gas. DO NOT OPERATE THE BARBECUE.
Contact the Customer Service Representative in
your region using the contact information sheet
provided with your manual.
3)	Side burner hose to side burner connection
4)	Valves to manifold connections
5)	Hose to quick disconnect connection

mWARNING: If there is a leak at connec- tions(2),(3),(4) or(5), turn OFF the gas. DO NOT OPERATE THE BARBECUE. Contact the Customer Service Representative in your region using the contact information sheet provided with your manual.

When leak checks are complete, turn gas supply OFF at the source and rinse connections with water.

(1)	(2)	Set the cooking grates onto the ledges in the cooking
		box with the rounded sides up.

(3)

	(4)
	Installing the Warm-Up™ Basket
	You will need: Warm-Up Basket
	Insert one end of the Weber Warm-Up Basket into the
(5)	hole at the right side of the inside of the lid, and the
	other end into the slot at the left side of the lid.

C-7