ASSEMBLY

INSTALL SEAT (See Fig. 3)

Adjust seat before tightening adjustment bolt.

Remove adjustment bolt, lock washer and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

Pivot seat upward and remove from the cardboard packing. Remove the cardboard packing and discard.

Place seat on seat pan so head of shoulder bolt is positioned over large slotted hole in pan.

Push down on seat to engage shoulder bolt in slot and pull seat towards rear of tractor.

Pivot seat and pan forward and assemble adjustment bolt, lockwasher and flat washer loosely. Do not tighten

Lower seat into operating position and sit on seat.

Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

Get off seat without moving its adjusted position.

Raise seat and tighten adjustment bolt securely.

SEAT

SEAT PAN

SHOULDER

BOLT

FLAT WASHER

LOCK WASHER

ADJUSTMENT

BOLT

FIG. 3

NOTE: You may now roll or drive your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid.

TO ROLL TRACTOR OFF SKID (See Operation section, page 10, for location and function of controls)

Press lift lever plunger and raise attachment lift lever to its highest position.

Release parking brake by depressing clutch/brake pedal.

Place gearshift lever in neutral (N) position.

Roll tractor forward off skid.

Remove banding holding deflector shield up against tractor.

TO DRIVE TRACTOR OFF SKID (See Opera- tion section, page 10, for location and func- tion of controls)

WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

Be sure all the above assembly steps have been completed.

Check engine oil level and fill fuel tank with gasoline.

Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

Place gear shift lever in neutral (N) position.

Press lift lever plunger and raise attachment lift lever to its highest position.

Start the engine. After engine has started, move throttle control to idle position.

Depress clutch/brake pedal into full "BRAKE" position and hold. Move gearshift lever to 1st gear.

Slowly release clutch/brake pedal and slowly drive tractor off skid.

Apply brake to stop tractor, set parking brake and place gearshift lever in neutral position.

Turn ignition key to "OFF" position.

Continue with the instructions that follow.

7

Page 7
Image 7
Weed Eater 182983 manual Install Seat See Fig, Lower seat into operating position and sit on seat

182983 specifications

The Weed Eater 182983 is a versatile and efficient tool designed for homeowners and landscaping professionals alike who require a reliable solution for their gardening and lawn maintenance needs. This trimmer is engineered to make yard work less of a chore, combining power, portability, and ease of use into its design.

One of the main features of the Weed Eater 182983 is its lightweight and ergonomic design, which ensures user comfort during extended use. Weighing in at just over 10 pounds, this trimmer is easy to maneuver, reaching tight spots and tackling overgrown areas without causing strain on the user's arms or back. The adjustable handle allows for a customizable grip, fitting a variety of user heights and preferences.

Powered by a robust 18-volt lithium-ion battery, the Weed Eater 182983 provides a significant run time with fade-free power. This technology enables the user to work for longer periods without the need for constant recharging. Additionally, the battery is designed to fully charge in approximately one hour, making it convenient for quick touch-ups or more extensive landscaping projects.

Another significant aspect of the 182983 model is the innovative 2-in-1 functionality. This weed eater is equipped with a cutting head that supports both string and blade trimming, allowing users to switch between different cutting methods based on the task at hand. The string trimmer is ideal for finer grass and weeds, while the blade system is effective for tougher vegetation and thicker brush.

The Weed Eater 182983 also features an automatic feed spool, which ensures that the cutting line is consistently at the optimal length for effective trimming. This technology eliminates the need for manual line advancement, streamlining the trimming process and enhancing efficiency.

Durability is another characteristic of the Weed Eater 182983, with its sturdy construction designed to withstand the rigors of outdoor use. The materials used in its manufacture are both lightweight and long-lasting, ensuring that this tool remains effective over time with proper care.

In summary, the Weed Eater 182983 stands out for its combination of a lightweight design, powerful battery, 2-in-1 functionality, and ease of use. It is an ideal choice for anyone looking to maintain their lawn and garden while minimizing effort and maximizing results.