HOW to Stop Your Unit

IMPORTANT

Experience indicates that alcohol blended fuels (called gasohol or using ethanol or metha- nol) can attract moisture which leads to separa- tion and formation of acids during storage. Acid- ic gas can damage the fuel system of an engine while in storage. To avoid engine problems, empty the fuel system before storage for 30 days or longer. Drain the gas tank, start the en- gine and let it run until the fuel lines and carbure- tor are empty. Use fresh fuel next season.

Never use engine or carburetor cleaner prod- ucts in the fuel tank or permanent damage may occur. See the STORAGE section for addi- tional information.

S To stop the engine, move the ON/OFF switch to the OFF position.

SIf engine does not stop, move choke to the FULL CHOKE position.

Engine Choke Lever

ON/OFF

Switch

FULL HALF OFF

HOW TO START YOUR UNIT

WARNING: The trimmer head will turn while starting the engine. Avoid any con- tact with the muffler. A hot muffler can cause serious burns.

STARTING A COLD ENGINE (or a warm engine after running out of fuel)

Starting Position

1.Set unit on a flat surface.

2.Move ON/OFF switch to the ON position.

3.Slowly press the primer bulb 6 times.

4.Move choke lever to the FULL CHOKE position.

5.Squeeze the throttle trigger fully and hold through all remaining steps.

Starter Handle

Choke

Lever

Muffler

Primer Bulb

6.Pull starter rope handle sharply until engine sounds as if it is trying to start, but do not pull rope more than 6 times.

7.As soon as engine sounds as if it is trying to start, move choke lever to HALF CHOKE position.

8.Pull starter rope sharply until engine runs, but no more than 6 pulls.

NOTE: If the engine doesn’t start after 6 pulls (at the HALF CHOKE position), move the choke lever to the FULL CHOKE position and press the primer bulb 6 times. Squeeze and hold the throttle trigger and pull the starter rope 2 more times. Move the choke lever to the HALF CHOKE position and pull the start- er rope until the engine runs, but no more than 6 pulls. If the engine still doesn’t start, it is probably flooded. Proceed to

STARTING A FLOODED ENGINE.

9.Once the engine starts, allow it to run 10 seconds, then move the choke lever to the OFF CHOKE position. Allow the unit to run for 30 more seconds at OFF CHOKE before releasing the throttle trig- ger.

NOTE: If engine dies with the choke le- ver in the OFF CHOKE position, move the choke lever to the HALF CHOKE position and pull the rope until engine runs, but no more than 6 pulls.

STARTING A WARM ENGINE

1.Move ON/OFF switch to the ON position.

2.Move the choke lever to the HALF CHOKE position.

3.Squeeze and hold the throttle trigger. Keep throttle trigger fully squeezed until the en- gine runs smoothly.

4.Pull starter rope sharply until engine runs, but no more than 5 pulls.

5.Allow engine to run 15 seconds, then move the choke lever to OFF CHOKE.

NOTE: If engine has not started, pull starter rope 5 more pulls. If engine still does not run, it is probably flooded.

STARTING A FLOODED ENGINE

Flooded engines can be started by placing the choke lever in the OFF CHOKE position; then, pull the rope to clear the engine of ex- cess fuel. This could require pulling the starter handle many times depending on how badly the unit is flooded.

If the unit still doesn’t start, refer to TROUBLESHOOTING TABLE or call 1-800-554-6723.

530163711 specifications

The Weed Eater 530163711 is a powerful and efficient solution for yard maintenance, designed to make trimming grass and clearing weeds easier and more effective. It stands out due to its user-friendly features and advanced technology, making it an essential tool for homeowners and landscaping professionals alike.

One of the main features of the Weed Eater 530163711 is its lightweight design. Weighing in at just around 10 pounds, it is easy to maneuver and reduces fatigue during extended use. Users can comfortably handle the trimmer for long periods, making it an ideal option for large lawns or gardens with hard-to-reach areas.

This model is equipped with a robust, gasoline-powered engine that ensures high performance and reliability. The powerful motor delivers impressive speed and cutting ability, allowing for quick and efficient trimming. Its cutting width of 17 inches allows users to cover significant ground in a shorter amount of time, making yard work less time-consuming.

The Weed Eater 530163711 features a patented dual-line advancement system. This technology enables the user to easily feed the line, ensuring consistent cutting performance without interruption. The auto-feed mechanism automatically releases fresh line when needed, preventing downtime and increasing productivity.

Another notable aspect is the adjustable telescoping shaft. This feature allows users to customize the length of the trimmer to their preferred height, promoting comfort and preventing unnecessary strain on the back and arms. Additionally, the angled head can be adjusted for versatility, allowing for both vertical and horizontal trimming, which is particularly useful for edges and borders.

In terms of safety, the Weed Eater 530163711 is equipped with an important safety guard that protects the user from debris and ensures a safer working environment. Furthermore, the ergonomic handle provides a secure grip, further enhancing comfort and control during operation.

In conclusion, the Weed Eater 530163711 is a reliable and efficient lawn care tool that combines advanced features and ergonomic design. With its powerful engine, lightweight construction, and user-friendly technology, this trimmer offers an excellent solution for managing weeds and maintaining a well-groomed landscape. It's an essential addition to any gardening toolkit.

Weed Eater 530163711 HOW to Stop Your Unit, HOW to Start Your Unit, Starting a Warm Engine

Models: 530163711