Cornelius 4 Flavor, 2 Flavor manual Removal Of The Ice Control Probe

Quest Juice Training Manual

REMOVAL OF THE ICE CONTROL PROBE

1.Carefully turn the chassis over to gain access to the probe assembly.

Cut the wire tie holding the probe assembly only. Push up and slide the probe assembly off the bracket. DO NOT REMOVE THE BRACKET.

2.The connector must be disassembled to pass the wire leads through the water bath cover.

3.Carefully remove the grommet from the water bath cover.

4.With the wire loose, pass the connectors first through the grommet and the water bath cover itself.

BE SURE TO REMEMBER THE WIRE
ORDER WHEN RE-ASSEMBLING
Current version	Early version
GRAY wire	BLACK wire
	cover
cover
Yellow	Blue
Orange	Brown
Purple	Green/Yellow

Publication Number: TP00968 - 26 - © 2004, IMI Cornelius Inc.