Quest Juice Training Manual
REMOVAL OF THE AGITATOR MOTOR
1.Remove the thumbscrew located at the rear of the motor before removing the agitator motor.
2.Lift the motor out of the ice bath. Disconnect the wire lead from the ice bank control.
Note: You will have to feed the water tubes through the refrigeration frame to completely remove.
REMOVAL OF THE REFRIGERATION CHASSIS
1.With the cabinet removed, remove (2) screws from the lower front and (2) screws from the lower rear of the water bath housing.
1
1
2
2.Unsnap the wire harnesses (red and white) connectors from the bracket mounted to the water bath cover.
3
4
Publication Number: TP00968 | - 24 - | © 2004, IMI Cornelius Inc. |