Quest Juice Training Manual
MECHANICAL SECTION
REMOVAL OF MERCHANDISER
1.Remove (6) screws from the top, the front, and the side of the door (as shown).
NOTE: You now have access to the ballast and light panel.
NOTE: Remember the door switch is used to reset the refill light.
NOTE: The pumps can not be operated with the door in the open position.
NOTE: Trying to bypass the door switch dur- ing the Brixing/Ratio procedure will result in longer pull down times and improper set- tings.
1 2
3
4 
5
6
Ballast Assembly 
© 2004, IMI Cornelius Inc. | - 13 - | Publication Number: TP00968 |
