OPERATION
KNOW YOUR BRUSHCUTTER ATTACHMENT
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR BRUSHCUTTER ATTACHMENT. Compare the illustrations with your unit to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference.
ShaftHanger
|
|
|
| Gearbox |
|
|
| |
|
| Blade Shield |
|
|
|
|
| |
|
|
|
|
| Blade |
|
| |
BLADE |
|
| BLADE SHIELD |
|
| |||
The BLADE is designed for cutting grass, | The BLADE SHIELD provides protection from | |||||||
weeds, and brush up to 1/2 inch in diameter. | the spinning blade. |
|
| |||||
|
|
|
|
| ||||
OPERATING THE COUPLER |
| 2. | Press and hold the locking/release button. | |||||
Your powerhead is equipped with a coupler |
|
|
|
|
| |||
which enables optional attachments to be |
| Locking/Release |
|
| ||||
installed. The optional attachments are: |
| Button |
|
|
| |||
|
| MODEL: |
|
|
|
| ||
|
|
|
|
|
|
| ||
Edger | 1000E |
|
|
|
|
| ||
Cultivator | 2000T |
|
|
|
|
| ||
Blower . . . . . . . . . . . . . . . . . . . . . . . 3000B |
| Coupler | Upper Shaft | |||||
WARNING: Always disconnect pow- | Lower Attachment | |||||||
|
| |||||||
|
|
|
|
| ||||
erhead spark plug before removing or instal- |
|
|
|
|
| |||
ling attachments. |
|
| 3. | While securely holding the upper shaft, | ||||
REMOVING BRUSHCUTTER AT- |
| pull the attachment straight out of the | ||||||
TACHMENT (OR OTHER OPTIONAL |
| coupler. |
|
|
| |||
ATTACHMENTS) |
|
| INSTALLING OPTIONAL ATTACH- | |||||
CAUTION: When removing or installing at- | MENTS |
|
|
| ||||
tachments, place the powerhead and attach- | 1. Remove the shaft cap from the attach- | |||||||
ment on a flat surface for stability. |
|
| ment (if present) and discard. | |||||
1. Loosen the coupler by turning the knob | 2. Position locking/release button of attach- | |||||||
counterclockwise. |
|
|
| ment into guide recess of upper shaft cou- | ||||
| Upper Shaft |
| pler. | Primary Hole | ||||
Coupler |
|
|
| Coupler | ||||
|
|
|
|
| Guide Recess | |||
Lower | LOOSEN |
|
|
|
|
| ||
|
|
|
|
|
|
| ||
Attachment |
|
|
|
|
|
|
| |
|
|
|
| Upper | Locking/ Attachment | |||
|
|
|
| Shaft | Release |
|
| |
TIGHTEN | Knob |
|
| Button |
|
| ||
3. | Push the attachment into the coupler until | |||||||
|
|
| ||||||
|
|
|
| the locking/release button snaps into the | ||||
|
|
|
| primary hole. |
|
|
| |
|
|
| 4. | Before using the unit, tighten the knob se- | ||||
|
|
|
| curely by turning clockwise. |
6