Manuals / Weed Eater / Lawn and Garden / Trimmer

Weed Eater 545186748 Idle Speed Adjustment, Seasonal Storage, Fuel System, Engine, Other

Models: 545186748

1 11
Download 11 pages 62.89 Kb
Page 8
Image 8

Make adjustments with the unit supported so the cutting attachment is off the ground and will not make contact with any object. Hold the unit by hand while running and making ad- justments. Keep all parts of your body away from the cutting attachment and muffler.

WARNING: Recheck the idle speed after each adjustment. The trimmer head must not move or spin at idle speed to avoid serious injury to the operator or others.

Idle Speed Adjustment

Allow engine to idle. Adjust speed until engine runs without trimmer head moving or spinning (idle too fast) or stalling (idle speed too slow). S Turn idle speed screw clockwise to in- crease engine speed if engine stalls or dies.

STurn idle speed screw counterclockwise to decrease engine speed if trimmer head moves or spins at idle.

Air Filter

Cover

Idle Speed Screw

If you require further assistance or are unsure about performing this procedure, contact an

authorized

service dealer or call

1--

800--

554--

6723.

STORAGE

WARNING: Perform the following steps after each use:

SAllow engine to cool, and secure the unit before storing or transporting.

SStore unit and fuel in a well ventilated area where fuel vapors cannot reach sparks or open flames from water heaters, electric

motors or switches, furnaces, etc.

SStore unit with all guards in place. Position unit so that any sharp object cannot acci- dentally cause injury.

SStore unit and fuel well out of the reach of children.

SEASONAL STORAGE

Prepare unit for storage at end of season or if it will not be used for 30 days or more.

If your unit is to be stored for a period of time:

SClean the entire unit before lengthy storage. S Store in a clean dry area.

S Lightly oil external metal surfaces.

FUEL SYSTEM

Under FUELING ENGINE in the OPERA- TION section of this manual, see message la- beled IMPORTANT regarding the use of ga- sohol in your engine.

Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to the gasoline in the fuel tank or fuel storage container. Fol- low the mix instructions found on stabilizer container. Run engine at least 5 minutes after adding stabilizer.

HELPFUL TIP

During storage of your gas/ oil mixture, the oil will sepa- rate from the gas.

We recommend that you shake the gas can weekly to insure proper blending of the gas and oil.

ENGINE

SRemove spark plug and pour 1 teaspoon of 40:1, 2-cycle engine oil (air cooled) through

the spark plug opening. Slowly pull the starter rope 8 to 10 times to distribute oil.

SReplace spark plug with new one of recom-

mended type and heat range.

SClean air filter.

S Check entire unit for loose screws, nuts, and bolts. Replace any damaged, broken, or worn parts.

SAt the beginning of the next season, use only fresh fuel having the proper gasoline to oil ratio.

OTHER

SDo not store gasoline from one season to another.

SReplace your gasoline can if it starts to rust.

8

Page 7 Page 9
Page 8
Image 8
Weed Eater 545186748 instruction manual Idle Speed Adjustment, Seasonal Storage, Fuel System, Engine, Other
Page 7 Page 9

545186748 specifications

The Weed Eater 545186748 is a highly efficient and powerful string trimmer designed for homeowners and landscape professionals alike. This string trimmer epitomizes convenience and performance, making it an excellent choice for tackling various landscaping tasks, from maintaining lawns to edging and trimming around gardens.

One of the standout features of the Weed Eater 545186748 is its robust engine. It boasts a powerful 25cc two-cycle engine, providing ample power to cut through thick grass and tough weeds effortlessly. The engine is designed to offer a balance of performance and fuel efficiency, allowing users to work longer without frequent refueling.

The trimmer features an innovative split-shaft design, which adds to its versatility. This design allows users to easily attach various accessories, such as blower attachments or cultivators, expanding the trimmer’s functionality and making it a multi-purpose tool in your landscaping arsenal.

Equipped with a 17-inch cutting width, the Weed Eater 545186748 allows users to cover more ground in less time, thereby improving efficiency. The quality of cutting is complemented by its easy-to-load string spool, which enables users to quickly change out line, minimizing downtime during projects.

One of the most user-friendly aspects of this trimmer is its lightweight and ergonomic design. Weighing in at just over 10 pounds, it is easy to maneuver, reducing fatigue during long trimming sessions. The adjustable handle ensures a comfortable grip, allowing the user to maintain control while working in various positions.

Safety features are also an important aspect of the Weed Eater 545186748. It includes a protective shield to guard against debris and cut grass, making it safer to operate in residential areas. Additionally, the trimmer is designed with anti-vibration technology, promoting user comfort and reducing strain on the hands and arms.

For cutting precision, the Weed Eater utilizes a dual line, bump feed head. This feature allows for quick line advancement simply by tapping the head on the ground, ensuring that users have the right amount of line for their trimming needs without interruptions.

In summary, the Weed Eater 545186748 stands out as a reliable and efficient string trimmer. With its powerful engine, versatile attachments, user-friendly design, and safety features, it is an excellent investment for anyone looking to maintain a well-manicured yard. Whether you are a seasoned landscaper or a first-time user, this trimmer can effectively meet your gardening needs.