ASSEMBLY

WARNING: Stop the unit and dis- connect from the power source before opening the inlet cover or attempting to in- sert or remove the inlet restrictor, blower tube, or vacuum tubes. The motor must be stopped and the impeller blades no longer turning to avoid serious injury from the rotating blades.

WARNING: If received assembled, ensure your unit is properly assembled and all fasteners are secure.

SA standard screwdriver is required for as- sembly.

BLOWER ASSEMBLY

NOTE: Assembly instructions for using your unit as a vacuum follow this section.

Attaching the blower tube

If you have already assembled your unit for use as a vacuum, refer to the section

HOW TO CONVERT UNIT FROM VACUUM USE TO BLOWER USE.

To attach blower tube:

1.Align the grooves on the blower tube with the grooves on the blower outlet.

2.Push the blower tube onto the blower outlet until it snaps into place (tube is secured by red tube release button).

3.To remove the blower tube, press the tube release button while pulling on tube.

Tube Release Button

Blower Tube

Blower outlet

VACUUM ASSEMBLY

NOTE: Assembly instructions for using your unit as a blower are explained in the previous section.

If you have already assembled your unit for use as a blower, remove the blower tube.

Remove the inlet restrictor

An inlet restrictor is used when using your unit as a blower. This restrictor is not used during vacuum use and must be removed during assembly for vacuum use.

NOTE: Be sure to keep the inlet re- strictor for using your unit as a blower.

1.Ensure unit is stopped and extension cord is unplugged.

2.Open the inlet cover by inserting the tip of a screwdriver into the latch area on the blower unit. Gently tilt handle

of screwdriver toward the front of the unit to release the latch while pulling up on the vacuum inlet cover with your other hand.

Bottom view

Latch Area

of unit

 

Vacuum Inlet Cover (closed)

 

Impeller

Latch Area

 

Vacuum Inlet Cover (opened)

3.Turn the inlet restrictor counterclock- wise and remove it from the unit. Do not close the inlet door. You will next attach the vacuum tubes.

Vacuum

Inlet Cover

Inlet

Restrictor

Attaching the vacuum tubes

There are 2 vacuum tubes, an upper tube and a lower tube. The upper tube has a vacuum assist handle attached to one end and is cut straight on both ends. The upper tube attaches to the blower unit. The lower tube has an angled end that you point toward the ground during vacuum use. The lower tube attaches to the upper tube.

1.Ensure unit is stopped and exten- sion cord is unplugged.

2.While holding inlet cover open, place the hooks of the vacuum assist handle on the retaining posts of the unit.

3.Raise the tube until it is secured to the blower unit by the red inlet cover latch.

Upper Vacuum Tube Vacuum Assist Handle

Hook

Retaining Post

5

Page 4 Page 6
Page 5
Image 5
Weed Eater 545186750 Standard screwdriver is required for as- sembly, Blower Assembly, Vacuum Assembly
Page 4 Page 6

545186750 specifications

The Weed Eater 545186750 is a powerful and efficient tool designed for homeowners and landscaping professionals alike. This versatile trimmer offers a combination of features that ensure a clean and precise cut, making it an essential addition to any outdoor maintenance arsenal.

One of the standout characteristics of the Weed Eater 545186750 is its 25cc two-cycle engine. This engine provides ample power to tackle tough weeds, grass, and overgrowth with ease. The lightweight design of the trimmer allows for easy maneuverability, enabling users to work in tight spaces or navigate around flower beds and garden edges without difficulty.

Equipped with a durable dual-line cutting system, the Weed Eater 545186750 ensures efficiency and effectiveness during operation. The trimmer uses a 0.095-inch line, which is ideal for cutting through thick vegetation, while the automatic bump feed system allows users to easily advance the line as needed, eliminating downtime and enhancing productivity.

The design of the Weed Eater 545186750 incorporates a straight shaft, which provides better reach and access to hard-to-reach areas. This feature is particularly beneficial for those tackling tall grass or weeds in challenging locations. Additionally, the trimmer comes equipped with a comfort grip handle, reducing fatigue during extended use and ensuring a more enjoyable experience.

Safety is also a key focus in the design of the Weed Eater 545186750. It features an integrated safety guard that protects the user from debris while cutting. Furthermore, the trimmer’s lightweight nature and balanced design contribute to its ease of use, making it suitable for users of all experience levels.

The user-friendly start system is another important aspect of the Weed Eater 545186750. With an easy-start technology, users can expect reliable starts with minimal effort, allowing them to get to work without frustration.

In summary, the Weed Eater 545186750 is a dependable and effective string trimmer that combines power, comfort, and ease of use. Its advanced features and thoughtful design make it a great choice for anyone looking to maintain a tidy yard or tackle landscaping projects. With its performance and efficiency, this trimmer is sure to meet the needs of a variety of users, from casual gardeners to professional landscapers.
Top Page Image Contents