Window Kit Assembly
1.Parts:
A)2 Track Screws
B)2 Wing Nuts
C1 & C2) 2 Hose Panels, one with Two Exhaust Hose Openings D) 1 Sliding Track Panel
2. Assembly:
First, take the Track Screws (A) and screw one into each of the small holes found on the Hose Panels (C1 & C2).
3.Next, take the Wing Nuts (B) and tighten them around each of the Track Screws (A). Do not tighten the Wing Nuts (B) all the way; make sure they are somewhat loose.
4.Now, place the Sliding Track Panel (D) over the Track Screw (A) on Hose Panel (C1).
5.Next, take the other Hose Panel (C2) and connect it to Hose Panel (C1) by placing the Sliding Track Panel
(D) over the Track Screw (A) on Hose Panel (C2).
6.The Hose Panels (C1 &C2) should now be con- nected using the Sliding Track Panel (D).
7.To complete the assembly, tighten the wing Nuts (B) installed earlier. The finished Window Kit should re- semble the image seen below.
8
