Weed Eater 952711802, 952711803 instruction manual Need ASSISTANCE?

Models: 952711803 952711802

1 11
Download 11 pages 8.64 Kb
Page 8
Image 8

STORAGE

WARNING: Perform the following steps after each use:

SAllow engine to cool, and secure the unit

before storing or transporting.

SStore unit and fuel in a well ventilated area where fuel vapors cannot reach sparks or

open flames from water heaters, electric motors or switches, furnaces, etc.

SStore unit with all guards in place. Position

unit so that any sharp object cannot acci- dentally cause injury.

SStore unit and fuel well out of the reach of children.

SEASONAL STORAGE

Prepare unit for storage at end of season or if it will not be used for 30 days or more.

If your unit is to be stored for a period of time:

SClean the entire unit.

SStore in a clean dry area.

S Clean all parts and check for damage. Have damaged parts repaired or replaced by an authorized service dealer.

SKeep all nuts, bolts, and screws tight.

SLightly oil external metal surfaces, includ- ing the blade.

To oil the blade, do the following:

SStop the engine and allow blade to come to a complete stop.

SEnsure ON/OFF switch is in the OFF posi- tion.

SDisconnect the spark plug wire.

SApply a light machine oil along the edge of the top strap as shown.

OIL

Top Strap

FUEL SYSTEM

Under FUELING ENGINE in the OPERA- TION section of this manual, see message la- beled IMPORTANT regarding the use of ga- sohol in your engine. Fuel stabilizer is an ac- ceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabi- lizer to gasoline in fuel tank or fuel storage con- tainer. Follow the mix instructions found on sta- bilizer container. Run engine at least 5 minutes after adding stabilizer.

HELPFUL TIP

During storage of your gas/ oil mixture, the oil will sepa- rate from the gas.

We recommend that you shake the gas can weekly to insure proper blending of the gas and oil.

ENGINE

SRemove spark plug and pour 1 teaspoon of 40:1, 2-cycle engine oil (air cooled) through

the spark plug opening. Slowly pull the starter rope 8 to 10 times to distribute oil.

SReplace spark plug with new one of recom- mended type and heat range (see RE-

PLACE SPARK PLUG section).

SClean air filter.

S Check entire unit for loose screws, nuts, and bolts. Replace any damaged, broken, or worn parts.

SAt the beginning of the next season, use only fresh fuel having the proper gasoline to oil ratio.

OTHER

SDo not store gasoline from one season to

another.

SReplace your gasoline can if it starts to rust.

NEED ASSISTANCE?

NEED ASSISTANCE?

Call 1-800-554-6723 for assistance.

NEED SERVICE PARTS?

Contact your dealer.

-- 8 --

Page 8
Image 8
Weed Eater 952711802, 952711803 instruction manual Need ASSISTANCE?

952711803, 952711802 specifications

The Weed Eater models 952711802 and 952711803 are robust tools designed to make yard maintenance more efficient and convenient. These two-string trimmers have gained popularity for their exceptional features and innovative technologies aimed at enhancing performance while ensuring user satisfaction.

One of the primary characteristics of both models is their lightweight design. Weighing in at just around 10 pounds, these trimmers provide users with a comfortable grip, minimizing fatigue during extended use. This portability allows for easy maneuverability around various terrains, including slopes and tight spaces that a mower might not reach.

Equipped with a powerful 25cc 2-cycle engine, the 952711802 and 952711803 are designed to deliver reliable performance. The engine operates at a high RPM, enabling swift cutting of thick weeds and grass. The trimmers also feature a dual-line system that automatically feeds the line during operation, which is a significant time-saver as it eliminates the need for manual line adjustments.

Another noteworthy feature is the ergonomic design. Both models have a telescoping shaft that can be easily adjusted to fit the user's height, ensuring a comfortable working position. The handle is padded and designed to reduce vibration, allowing for a smoother experience. This user-friendly design is complemented by an easy-start technology, which simplifies the ignition process compared to traditional pull-starts.

In terms of durability, Weed Eater has incorporated high-quality materials into the construction of these trimmers. The cutting head is reinforced to withstand wear and tear, making it suitable for both residential and light commercial use. Additionally, the models are equipped with shield protection that helps to contain debris, ensuring safety for the user while working.

For enhanced capability, the Weed Eater 952711802 and 952711803 are also compatible with various attachments, making them versatile tools for different landscaping tasks such as edging, pruning, and even tilling. This adaptability ensures that the trimmers can be used year-round, enhancing their value.

Overall, the Weed Eater 952711802 and 952711803 provide a balance of power, ergonomics, and durability, making them suitable choices for anyone seeking to maintain their lawn with efficiency and ease. The combination of advanced technology and thoughtful design positions these trimmers as reliable partners in yard work, allowing users to achieve professional-quality results with every use.