IMPORTANT POINTS

SUse the minimum throttle speed necessary to effectively cut hedges for optimal hedge

trimmer performance.

SNever attempt to use this hedge trimmer to cut hedges that have any branches with a diameter larger than 7/16″.

OPERATING POSITION

Hearing

Protection Eye

Protection

STOPPING YOUR ENGINE

D To stop the engine, move the ON/OFF switch to the OFF position.

STARTING YOUR ENGINE

DFuel engine. Move at least 10 feet (3 me- ters) away from the fueling site.

DHold the unit on the ground in the starting position as shown. Support unit so the blade is off of the ground and away from trees, bushes, onlookers, etc.

HELPFUL TIP

If your engine still does not start after following these instructions, please call 1-800-554-6723.

STARTING A COLD ENGINE (or a warm engine after running out of fuel)

Throttle Lock

Throttle

Lock-out

Throttle

Trigger

1.Move the ON/OFF switch to the ON posi- tion.

2.Engage the throttle lock as follows: D press the throttle lock--out;

D squeeze and hold throttle trigger; D press and hold throttle lock, then D release the throttle trigger

NOTE: Keep the throttle lock engaged until the engine starts.

ON OFF

Switch

3.Slowly press the primer bulb 6 times.

4.Move the choke lever to the FULL CHOKE position.

Primer Bulb

Choke

 

 

Lever

5.Pull starter rope handle sharply until en- gine sounds as if it is trying to run, but do not pull rope more than 6 times.

6.Move the choke lever to the HALF CHOKE position.

7.Pull starter rope sharply until the engine runs, but no more than 6 pulls.

NOTE: If the engine doesn’t start after 6 pulls (at the HALF CHOKE position), check to make sure the ON/OFF switch is in the ON position. Move the choke lever to the FULL CHOKE position and press the primer bulb 6 times; pull the starter rope 2 more times. Move the choke lever to the HALF CHOKE position and pull the starter rope until the engine runs, but no more than 6 more pulls. If the engine still doesn’t start, it is probably flooded. Proceed to STARTING A FLOODED ENGINE.

8.Once the engine starts, allow the engine to run 10 seconds, then move the choke lever to the OFF CHOKE position. Allow the unit to run for 30 more seconds at the OFF CHOKE position before squeezing and releasing the throttle trigger to release the throttle lock.

NOTE: If engine dies with the choke lever in the OFF CHOKE position, move the choke le- ver to the HALF CHOKE position and pull the rope until the engine runs, but no more than 6 pulls.

STARTING A WARM ENGINE

1.Move the ON/OFF switch to the ON posi- tion.

2.Slowly press the primer bulb 6 times.

3.Move the choke lever to the HALF CHOKE position.

4.Engage the throttle lock as directed in

STARTING A COLD ENGINE.

-- 5 --

Page 4 Page 6
Page 5
Image 5
Weed Eater 952711803, 952711802 Important Points, Operating Position, Stopping Your Engine, Starting Your Engine
Page 4 Page 6

952711803, 952711802 specifications

The Weed Eater models 952711802 and 952711803 are robust tools designed to make yard maintenance more efficient and convenient. These two-string trimmers have gained popularity for their exceptional features and innovative technologies aimed at enhancing performance while ensuring user satisfaction.

One of the primary characteristics of both models is their lightweight design. Weighing in at just around 10 pounds, these trimmers provide users with a comfortable grip, minimizing fatigue during extended use. This portability allows for easy maneuverability around various terrains, including slopes and tight spaces that a mower might not reach.

Equipped with a powerful 25cc 2-cycle engine, the 952711802 and 952711803 are designed to deliver reliable performance. The engine operates at a high RPM, enabling swift cutting of thick weeds and grass. The trimmers also feature a dual-line system that automatically feeds the line during operation, which is a significant time-saver as it eliminates the need for manual line adjustments.

Another noteworthy feature is the ergonomic design. Both models have a telescoping shaft that can be easily adjusted to fit the user's height, ensuring a comfortable working position. The handle is padded and designed to reduce vibration, allowing for a smoother experience. This user-friendly design is complemented by an easy-start technology, which simplifies the ignition process compared to traditional pull-starts.

In terms of durability, Weed Eater has incorporated high-quality materials into the construction of these trimmers. The cutting head is reinforced to withstand wear and tear, making it suitable for both residential and light commercial use. Additionally, the models are equipped with shield protection that helps to contain debris, ensuring safety for the user while working.

For enhanced capability, the Weed Eater 952711802 and 952711803 are also compatible with various attachments, making them versatile tools for different landscaping tasks such as edging, pruning, and even tilling. This adaptability ensures that the trimmers can be used year-round, enhancing their value.

Overall, the Weed Eater 952711802 and 952711803 provide a balance of power, ergonomics, and durability, making them suitable choices for anyone seeking to maintain their lawn with efficiency and ease. The combination of advanced technology and thoughtful design positions these trimmers as reliable partners in yard work, allowing users to achieve professional-quality results with every use.
Top Page Image Contents