CAUTION: Never use straight gasoline in your unit. This will cause permanent engine damage and void the limited warranty.

FUEL REQUIREMENTS

This engine requires the use of minimum 87 octane [R+M]/2 clean gasoline.

IMPORTANT

Use of alcohol blended fuels (called gasohol or using ethanol or methanol) can cause major en- gine performance and durability problems.

WARNING: Alternative fuels (not gas- oline) such as E--15 (15% alcohol), E--20 (20% alcohol), E--85 (85% alcohol) are NOT classified as gasoline and are NOT approved for use in 2--stroke gasoline engines. Use of alternative fuels will cause problems such as: improper clutch engagements, overheating, vapor lock, power loss, lubrication deficiency, deterioration of fuel lines, gaskets and internal carburetor components, etc. Alternative fuels cause high moisture absorption into the fuel/oil mixture leading to oil and fuel separation.

HELPFUL TIP

If your engine switch reads “push to stop”, it is always in the ON position.

HOW TO STOP YOUR UNIT

STo stop the engine, push and hold the STOP switch in the STOP position until the engine stops.

SIf engine does not stop, move choke to the FULL CHOKE position.

HOW TO START YOUR UNIT

WARNING: The trimmer head will turn while starting the engine. Avoid any con- tact with the muffler. A hot muffler can cause serious burns.

HELPFUL TIP

If your engine still does not start after following these instructions, please call 1-800-554-6723.

STARTING A COLD ENGINE (or a warm engine after running out of fuel)

STARTING POSITION

1.Set unit on a flat surface.

2.Slowly press the primer bulb 6 times.

3.Move choke lever to the FULL CHOKE position.

4.Squeeze the throttle trigger fully and hold through all remaining steps.

Primer

Bulb

Choke

Lever

Starter

Handle

Thottle

Trigger

5.Pull starter rope handle sharply until engine sounds as if it is trying to start, but do not pull rope more than 6 times.

6.As soon as engine sounds as if it is trying to start, move choke lever to HALF CHOKE position.

7.Pull starter rope sharply until engine runs, but no more than 6 pulls. NOTE: If the en- gine doesn’t start after 6 pulls (at the HALF CHOKE position), move the choke lever to the FULL CHOKE position and press the primer bulb 6 times. Squeeze and hold the throttle trigger and pull the starter rope 2 more times. Move the choke lever to the HALF CHOKE position and pull the starter rope until the engine runs, but no more than 6 pulls. If the engine still doesn’t start, it is probably flooded. Proceed to STARTING A FLOODED ENGINE.

8.Once the engine starts, allow it to run 10 se- conds, then move the choke lever to the RUN position. Allow the unit to run for 30 more seconds at RUN before releasing the throttle trigger. NOTE: If engine dies with the choke lever in the RUN position, move the choke lever to the HALF CHOKE position and pull the rope until engine runs, but no more than 6 pulls.

STARTING A WARM ENGINE

1.Move the choke lever to the HALF CHOKE position.

2.Squeeze and hold the throttle trigger. Keep throttle trigger fully squeezed until the en- gine runs smoothly.

3.Pull starter rope sharply until engine runs, but no more than 6 pulls.

4.Allow engine to run 15 seconds, then move the choke lever to RUN.

NOTE: If engine has not started, pull starter rope 5 more pulls. If engine still does not run, it is probably flooded.

7

Page 6 Page 8
Page 7
Image 7
Weed Eater 952711938 Fuel Requirements, HOW to Stop Your Unit, HOW to Start Your Unit, Starting a Warm Engine
Page 6 Page 8

952711938 specifications

The Weed Eater 952711938 is a cutting-edge tool designed for homeowners and landscape professionals alike, showcasing remarkable features and technologies that enhance yard maintenance efficiency. This model is distinguished by its lightweight design, making it exceptionally easy to maneuver around gardens, flower beds, and hard-to-reach places. Weighing in at just a few pounds, users can operate it for extended periods without undue fatigue.

One of the standout features of the Weed Eater 952711938 is its powerful gas engine, which provides impressive performance while tackling thick grass and weeds. The engine is engineered for optimal power output, ensuring that users can complete their tasks swiftly and effectively. This model also features an automatic line feed system, which simplifies the process of maintaining the cutting line. With this technology, users can focus on their trimming duties without the hassle of manually adjusting the line length.

The dual-line cutting head of the Weed Eater 952711938 also enhances its efficiency. Equipped with two lines, it allows for a wider cutting path, enabling users to cover a larger area in fewer passes. This characteristic makes it an ideal choice for larger properties or landscaping projects that require thorough weed control.

Durability is another hallmark of the Weed Eater 952711938. Constructed with high-quality materials, it is built to withstand the rigors of regular use in varying outdoor conditions. The robust design not only increases the longevity of the tool but also minimizes maintenance needs.

A notable aspect of the Weed Eater 952711938 is its ergonomic handle design, which prioritizes user comfort. The adjustable handle can be customized to suit different user heights and preferences, reducing strain during operation. Additionally, the anti-vibration technology incorporated in the handle allows for a smoother operation, ensuring a more pleasant mowing experience.

Moreover, the unit is compatible with a variety of attachments, expanding its versatility. Whether users need to edge their lawn or clear brush, the Weed Eater 952711938 can adapt to various landscaping tasks with ease.

In conclusion, the Weed Eater 952711938 combines power, efficiency, and comfort in one user-friendly package. Its blend of advanced features, including a lightweight design, powerful engine, automatic line feed, dual-line cutting capability, and ergonomic considerations, makes it a valuable tool for homeowners and professionals looking to maintain a well-groomed yard. Investing in this model is a step toward enhancing your landscaping efforts and ensuring a pristine outdoor space.
Top Page Image Contents