ASSEMBLY
WOW TO SET UP YOUR TRACTOR
CONNECT BATTERY (See Figs. 2 and 3)
Positive terminal must be connected sparking from acci-
* Remove cardboard packing from seat pan and lift - seat pan to raised position.
Open battery box door.
Remove terminal protective caps and discard.
If this battery is put into service after month and year indicated on label (label located between terminals) charge battery for minimum of one hour at
First connect RED battery cable to positive (+) termi- nal with hex bolt, flat washer, lock washer and hex nut as shown. Tighten securely.
Connect BLACK grounding cable to negative
* Close battery box door. Open battery box door for:
lnspection for secure connections (to tighten hard- ware).
lnspection for corrosion. Testingbattery. Jumping (if required). Periodic charging .
BLE CAPS
LOCK
HEX WASHER \ I FLAT
SEAT
PAN
BATTERY
BOX DOOR
II
FIG. 3
INSTALL SEAT (See Fig. 4)
Adjust seat before tightening adjustment bolt. Remove cardboard packing on seat pan.
Place seat on pan and assemble shoulder bolt. Tighten shoulder bolt securely.
Assemble adjustment bolt, lock washer and flat washer loosely. Do not tighten.
Lower seat into operating position and sit on seat.
Slide seat until a comfortable position is reached which allows you to press clutchlbrake pedal all the way down (See Fig. 8).
Get off seat without moving its adjusted position. Raise seat and tighten adjustment bolt securely.
FLAT WASHER
FIG. 4
NEGATI~E (BLACK) CABLE
FIG. 2