Weed Eater 165412 TO REMOVE MOWER See Fig, TO INSTALL MOWER See Fig, Service And Adjustments

Models: 165412 HD12538G

1 52
Download 52 pages 38.49 Kb
Page 19
Image 19
SERVICE AND ADJUSTMENTS

SERVICE AND ADJUSTMENTS

Depress clutchbrake pedal fully and set parking brake.

Place gearshift lever in neutral (N) position.

Place attachment clutch in "DISENGAGED" position.

Turn ignition key "OFF" and remove key.

Make sure the blades and all moving parts have completely stopped.

ct spark plug wire from spark plug and place wire where it cannot come in contact

TO REMOVE MOWER (See Fig. 16)

Mower will be easier to remove from the right side of trac- tor.

Place attachment clutch in "DISENGAGED position.

Move attachment lift lever forward to lower mower to its lowest position.

Roll belt off engine pulley.

Disconnect clutch rod from clutch lever by removing retainer spring.

Disconnect anti-sway bar from chassis bracket by re- moving retainer spring.

Disconnect suspension arms from rear deck brackets by removing retainer springs.

Disconnect front links from deck by removing retainer springs.

Raise lift lever to raise suspension arms. Slide mower out from under tractor.

RETAINER SPRING

IMPORTANT: IF AN ATTACHMENT OTHER THAN THE

MOWER DECK IS TO BE MOUNTED ON THE TRACTOR,

REMOVE THE FRONT LINKS.

TO INSTALL MOWER (See Fig. 16)

ANTI-SWAY B

-

Raise attachment lift lever to its highest position.

 

-

Slide mower under tractor with discharge guard to

 

right side of tractor.

 

Lower lift lever to its lowest position.

FIG. 16

Install mower in reverse order of removal instructions.

Page 19
Image 19
Weed Eater 165412, HD12538G manual TO REMOVE MOWER See Fig, TO INSTALL MOWER See Fig, Service And Adjustments