RIDING MOWER -
ELECTRICAL |
|
|
LRV1 |
|
|
| 5 |
|
|
| 6 |
11 |
|
|
| 3 | 4 |
| 13 |
|
|
| 2 |
| 12 |
|
10 | 1 |
|
|
| |
9 |
|
|
14 |
|
|
8 | 7 |
|
TO OPERATE MOWER
Your riding mower is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the deck clutch engaged will shut off the engine. You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equipment on rough, rolling terrain or hills.
1.Select desired height of cut.
2.Start mower blade by engaging deck clutch lever.
TO STOP MOWER BLADE-
Disengage deck clutch lever.
Deck Clutch Lever | Mower Height |
"Disengaged" Position | Adjustment High |
| Position |
| Mower Height | |
Deck Clutch Lever | Adjustment | |
Low Position | ||
"Engaged" Position | ||
|
CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield in place.
REVERSE OPERATION SYSTEM (ROS)
Your tractor is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel in the reverse direc- tion with the deck clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position.
WARNING: Backing up with the deck clutch engaged while mowing is strongly discouraged. Turning the ROS "ON", to al- low reverse operation with the deck clutch engaged, should only be done when the operator decides it is necessary to reposi- tion the machine with the attachment
engaged. Do not mow in reverse unless absolutely necessary.
USING THE REVERSE OPERATION SYSTEM -
Only use if you are certain no children or other bystanders will enter the mowing area.
1.Move motion control lever to neutral
(N) position.
2.With engine running, turn ignition key counterclockwise to ROS "ON" posi- tion.
3.Look down and behind before and while backing.
4.Slowly move motion control lever to reverse (R) position to start movement.
5.When use of the ROS is no longer needed, turn the ignition key clockwise to engine "ON" position.
ROS "ON" Position | Engine "ON" Position |
| (Normal Operating) |
02828
28 |
Deflector Shield
13